Related topics

Water Damage Restoration & Flood Cleanup Companies

July 27, 2020 GMT

New York, NY - ( NewMediaWire ) - July 27, 2020 - It is a common thing that a homeowner gets water damage at some point. The best thing is to try and avoid it but this isn’t something we can all do. In the content below, we will discuss the causes of this kind of damage, categories present, and also the overall process that will be used for restoration, how this best water damage restoration companies do. Without further ado, let’s begin.

Common causes

Water damage restoration specialists says that there are a few main causes of water damage and all of them have the same effect. This issue is defined when water comes in contact with your living area, your belongings, furniture, floor, or construction in general. You can get a better idea if you take a look at the most common causes. They are:

·         Leaking pipes

·         Clogged toilet

·         Floods

·         Leaking roofs

·         Wall moisture

Regardless of which cause is present and why the main issue happened in the first place, immediate actions are mandatory. They are needed to make the living area livable again and to eliminate any more severe problems which may occur later.

Above, we have mentioned only the most common causes. In reality, there are countless possibilities and they cannot be generalized. The problem may be present even if a small portion of the walls and floor is affected with water, you can see moisture and even mold. Living in that space is dangerous and can cause severe health issues. For more inforamation and oredering water damage restoration service you can visit water damage restoration service website.


Water restoration is a complicated process, which is based on removing water and making the area safe to use. But, not all water-related issues are the same. There are 3 main categories. They are explained below.

·         Category 1

Category 1 is the least severe cause and it means that the excess water came from sources safe for humans. The best example is a sprinkler system, water supply line, rain, and similar water sources. This water isn’t dangerous for people when consumed, inhaled, or when it comes in contact with human skin. This is also commonly referred to as the fresh water category.

·         Category 2

Category 2 is when the water that flooded or damaged a living area does contain a part of chemicals, microorganisms, or anything else that can have a negative effect on humans and animals. It is known as gray water. In this case scenario, water removal is even more essential.

·         Category 3

Category 3 is the most severe level. This means that the water source is seriously harmful to humans and animals. The most common issue and the best example is raw sewage! This water contains chemicals, heavy metals, contaminants and so much more that is all very harmful when it comes to contact with humans.


There is another classification we can define here. It comes from IICRC and there are 4 classes.

·         Class 1

This is the least severe water damage restoration process. It means that less than 5% of the total area is affected and very little moisture is left once the water is removed. Drying is effective and requires the least time.

·         Class 2

Class 2 is more severe but still considered as less significant. An example can be when a pipe with water broke behind a wall. Cleaning and removing water is fast, simple and recovery time is short.

·         Class 3

Class 3 is when a massive amount of water gets into a home. An example here can include a storm and a flood. A high level of evaporation is needed. Water got into porous materials and removal is time-consuming.

·         Class 4

Class 4 is similar to class 3, but there is one major difference. The water is trapped behind the items, walls, or even the floor. Removing the water is, therefore a very complicated process that requires plenty of time and effort. It is the worst case scenario of the 4.

How water damage cleanup works?

If you suffer from any form of damage caused by water, you will need professional help. Their mission is to remove excess water and restore the living area so it is safe for people and pets. The overall process may be complicated and it depends on the aforementioned classes and categories. However, all variations have the same steps. For more inforamation and oredering restoration service you can visit water damage restoration service website.

1.      Inspection

Restoration companies start with an inspection. This is a process in which they will find the water source which affected the room or a house, stop water leaks and also inspect all other potential leaks and causes that may cause the same issue in the near future. They also test the water and they will determine the type of water. This gives you the damage class.

This step is slightly more complex than it seems. The goal is to determine why a problem happened, how severe it is, and are there any risk for a repetitive issue. Special tools are used for this step and it may take up to a few hours.

2.      Removing excess water

Flood damage restoration during the second stage is probably the one that lasts the longest. Here, all excess water you can see and you cannot see will be removed. This usually involves removing furniture, carpets, flooring, and all the rest which may contain water.

The purpose of this step is to prepare a house or an apartment for restoration. Once basic and more obvious sub-processes are completed, the moisture level is measured and also IR cameras are used to determine the moisture and any water behind solid surfaces.

All of the water extracted is pumped using strong vacuum pumps and submersible pumps and stored in a proper vehicle and then removed accordingly.

3.      Dehumidification and drying

As some of you may know already, every single damage caused by water and obviously flood restoration has this step. This is when the moisture is removed from the home. The equipment here is usually an industrial grade. We can see large dehumidifiers and air movers.

During this step, all that is damaged will be removed from a home. This may include the aforementioned flooring, carpets, furniture, damaged items, and more. The equipment we also have mentioned earlier will raise the temperature inside and make sure that there is no moisture left in the house. Once all of this is sorted out, the next step is possible.

We must add that some homeowners believe that if they leave windows and doors open for a long period of time, they will solve the problem. This is theoretically possible. But, you may need to keep all the windows and doors open for a few months in order to get the job done. When humidifiers and air movers are used, the entire process only takes a couple of hours.

4.      Sanitizing the area

Here we have one step that is also always mandatory. It is even more important in the case of flood damage. The mission here is to remove all the odors, all the waste, and everything else that may come with the water. In most situations, air fresheners are used.

The end result is a room in which you can only visually see that there was damage caused by water. Flood cleanup may take up to a few hours or even days, depending on the damage.

A more important aspect of this step is removing the microorganisms, bacteria, or anything else that may cause further issues to the people and pets.

5.      Final restoration

This step is used to restore your living area to the previous state, before the damage. Once water remediation is completed and there are no traces of excess water, moisture, or anything similar, restoration can begin.

This is a very complex step and we cannot generalize it nor explain it with a few words, but we will try the best we can. It starts with cleaning the wall damages, stains and also damaged to other surfaces. Walls are painted in any color you like and the floor is replaced. Homeowners can install the same type as they had before, such as the hard floor, carpets, or anything similar or they can replace and get a new type.

These are all less-severe parts of the restoration. In a case of flooded basement, the construction must be sorted out and repaired. If the problem was on the roof, it must be solved as well. The main mission is to restore the home in the previous condition and also solve the risk of what damage of this kind occurred in the first place. As such, homeowners are certain that they won’t have the same problem again.

The end result is a beautiful home that looks even better than before the damage. It is also more secure now and risk from another damage is close to 0. For more inforamation and oredering restoration service you can visit water damage restoration service website.


In a case of damage caused by any form of water, restoration is mandatory. This is a complicated process in which the water damages will be detected, the excess water removed, and also damages will be completely sorted out. In the end, you get almost a home that will be immune to further damages from any type of water source.

This Press Release was published by Boost SEO Metrics. For publishing similar content you can contact at